Consolidated Statutes and Regulations Consolidated Statutes Consolidated Regulations Annual Statutes and Regulations Annual Statutes Annual Regulations Additional information Québec Official Publisher What’s new? Information note Policy of the Minister of Justice Laws: Amendments Laws: Provisions not in force Laws: Provisions brought into force Annual Statutes: PDF versions since 1996 Regulations: Amendments Annual Regulations: PDF versions since 1996 Court Decisions

S-2.1, r. 15 - Regulation respecting safety and health in foundry works

Section 40
Disposition versions

Full text
40. Tap holes: When botting-up tapping holes, the bott shall not be driven directly into the stream of molten metal. The bott shall be brought up immediately over the stream close to the hole and applied at a sharp angle so as to minimize spattering of the metal.
R.R.Q., 1981, c. S-2.1, r. 20, s. 40.
© Gouvernement du Québec